What’s a uranium centrifuge?
Uranium is an element that is similar to iron. Like iron, you dig uranium ore out of the ground and then process it to extract the pure uranium from the ore. When you finish processing uranium ore, what you have is uranium oxide. Uranium oxide contains two types (or isotopes) of uranium: U-235 and U-238. U-235 is what you need if you want to make a bomb or fuel a nuclear power plant. But the uranium oxide from the mine is about 99 percent U-238. So you need to somehow separate the U-235 from the U-238 and increase the amount of U-235. The process of concentrating the U-235 is called enrichment, and centrifuges are a central part of the process.
U-235 weighs slightly less than U-238. By exploiting this weight difference, you can separate the U-235 and the U-238. The first step is to react the uranium with hydrofluoric acid, an extremely powerful acid. After several steps, you create the gas uranium hexafluoride.
Now that the uranium is in a gaseous form, it is easier to work with. You can put the gas into acentrifuge and spin it up. The centrifuge creates a force thousands of times more powerful than the force of gravity. Because the U-238 atoms are slightly heavier than the U-235 atoms, they tend to move out toward the walls of the centrifuge. The U-235 atoms tend to stay more toward the center of the centrifuge.
Although it is only a slight difference in concentrations, when you extract the gas from the center of the centrifuge, it has slightly more U-235 than it did before. You place this slightly concentrated gas in another centrifuge and do the same thing. If you do this thousands of times, you can create a gas that is highly enriched in U-235. At a uranium enrichment plant, thousands of centrifuges are chained together in long cascades.
At the end of a long chain of centrifuges, you have uranium hexafluoride gas containing a high concentration of U-235 atoms.
The creation of the centrifuges is a huge technological challenge. The centrifuges must spin very quickly — in the range of 100,000 rpm. To spin this fast, the centrifuges must have:
- very light, yet strong, rotors
- well-balanced rotors
- high-speed bearings, usually magnetic to reduce friction
Meeting all three of these requirements has been out of reach for most countries. The recent development of inexpensive, high-precision computer-controlled machining equipment has made things somewhat easier. This is why more countries are learning to enrich uranium in recent years.
Now you need to turn the uranium hexafluoride gas back into uranium metal. You do this by adding calcium. The calcium reacts with the fluoride to create a salt, and the pure uranium metal is left behind. With this highly concentrated U-235 metal, you can either make a nuclear bomb or power a nuclear reactor